Call 08048763383 89% Response Rate

our range

Load Cell

Our product range includes a wide range of jumbo load cell, adi artech single point load cell, table top load cell, aluminum load cells, ss compression load cell and tension sensing beam load cell.
Jumbo Load Cell

Jumbo Load Cell

Rs 3,300  / PieceGet Best Price
Capacity500,750,1000,1500,2000,3000 KGF
Model Number60810
IP RatingIP65
Nominal Output2. 0 mv/ v
Ultimate Overload Of Rated Capacity250%
Cable Length5 Meter,Minimum(4 core screened)
insulation resistance1000 mega ohms (50 vdc)
safe overload of rated capacity150%
Price Range 2150 to 3300    
  

Description
Model 60810 Jumbo Load Cell is a strain gage based low profile bending beam load cell and is ideal for precision single point platform scale applications. It is designed for low eccentric load sensitivity. This supports large platform size of 1 mtr. X 1 mtr. It is constructed from tool steel for heavy shock loads.

Features:

  • Single point capability for platform scale.
  • Minimum error for off centre loading.
  • Low profile.
  • Compact and light weight.
  • Moisture proof sealing.

Applications:

  • Large platform scale
  • Steel weighers

Electrical termination:

  • +input red
  • +output green
  • -input black
  • -output white
  • Shield

View Complete details

get quoterequest a call back
ADI Artech Single Point Load Cell

ADI Artech Single Point Load Cell

Rs 700.00  / piecesGet Best Price
Load Capacity1.5, 2, 2.5, 3, 5,10, 15, 20, 30, 40, 50, 75, 100 & 120 KGF
Model Number60510
MaterialAnodized Aluminium Alloy
Excitation Voltage10-15 V DC
Nominal Output2.0 mV/ V
Insulation Resistance1000 Mega Ohms(50 VDC)
Cable Length1 Meter, Minimum(4 Core Screened)
Safe Overload of Rated Capacity150%

Description
Model 60510 Single Point Load Cell is a Strain Gage based low profile bending beam Load Cell and is ideal for Bench, Counting, Floor, Postal and Retail Scales. It is designed for low eccentric load sensitivity. It is Constructed from Anodized Alluminum Alloy.
Features:Single Point Capability with Minimum Off-centre Error.Low Profile Bending Beam Load Cell Design.Supports the Platform Size of 400 x 400 mm.Moisture Proof Sealing for Harsh Environment.
Applications:Check WeighersBagging MachinesBench, Counting & Postal Scales


Electrical Termination:+Input Red+Output Green-Input Black-Output WhiteShield


View Complete details

get quoterequest a call back
Table Top Load Cell

Table Top Load Cell

Rs 200.00  / PieceGet Best Price
Nominal Output2.0 mV/ V
Ultimate Overload Of Rated Capacity200%
Cable Length500 mm. Minimum(4 Core Screened)
Excitation Voltage10 VDC- Maximum 15 VDC
Standard Capacities3, 6, 10, 15, 20, 30, 40, 60 KGF
Insulation Resistance1000 Mega Ohms (50 VDC)
Safe Overload of Rated Capacity150%
Temp Compensated Range0-60 0C
Single Point Table Top Load Cell.

Description


This is an economical Load Cell meant for off-centre loading applications. It is used in bench, counting and postal Scales. It is strain gauge based Cell constructed from Aluminum Alloy for better sensitivity.

Features:

  • Single Point Off-centre Load Measuring Capability.
  • Economical and Low Profile Cell.

Applications:

  • Bench, Counting & Postal Scales.
  • Check Weighers.

Electrical Termination:

  • +Input Red
  • +Output Green
  • -Input Black
  • -Output White
  • Shield

View Complete details

get quoterequest a call back
Aluminum Load Cells

Aluminum Load Cells

Rs 700  / UnitGet Best Price
Standard Capacities7.5, 10, 15, 25, 50, 75, 100, 150, 200 TF
Environmental Protection ClassIP65
Excitation Voltage10-15 VDC
Nominal Output1.0 m V/ V
Insulation Resistance1000 Mega Ohms(50 VDC)
Safe Overload of Rated Capacity150%
Ultimate Overload of Rated Capacity200%
Allowable Side Load50%

View Complete details

get quoterequest a call back
SS Compression Load Cell

SS Compression Load Cell

Rs 30,000  / PieceGet Best Price
MaterialStainless Steel
Standard Capacities5,7.5,10,15,20,30,50,100,150 TF
Excitation Voltage2.0 mV/V
Cable Length5Mtrs (4 Core)
Safe Overload150%
Ultimate Overload of Rated250%
Temp Compensated Range0-60 Deg C
Environmental Protection ClassIP65
Price range: Rs.30000 to 35000

Description


90610-TH is through hole compression Load Cell, specially designed for fastener testing where the compression loading of sensor is induced by tensile loading of the fastener. It is strain gage based with full temperature compensation over 0 to 60°C. It is easy to install and use. It is supplied with mating connector. It can be used to measure suspended load by mounting the load cell on flat surface and apply load to the leg mount passed through the hollow center. Fastener testing can be done by passing it through hole. Then apply force by tightening the nut. Washers at both ends are recommended to avoid damage to the cell’s surfaces.

Features:
  • Optionally can be offered in Stainless Steel 17-4 ph grade.
  • Other capacities can be customized as per requirements.

Applications:

  • Fastener Testing
  • Bolt Force Measurement
  • Material Testing
  • Press Calibration
  • Civil Engineer Testing
  • Injection Molding Machine
  • Tablet Manufacturing Machine
  • Robotics & Industrial Automation

Electrical Termination:

  • +Input Red
  • +Output Green
  • -Input Black
  • -Output White
  • Shield

View Complete details

get quoterequest a call back
Tension Sensing Beam Load Cell

Tension Sensing Beam Load Cell

Price on Request
Capacity10,20,50,100,200,500,1000,1500 KGF
MaterialSteel
Nominal Output2.0 mV/V
Excitation Voltage10-15 V DC
Safe overload100%
Ultimate Overload of Rated200 %
Allowable Side Load50%
Environmental Protection ClassIP65
Description

Strain gage based design, Temperature compensated, Provided with over load protection, Can be installed easily, Suitable for fitting plummer block with bearing.


Applications

Used for measuring the tension of materials drawn over rotating rollers such as:
  • Paper
  • Foil
  • Magnetic Tape
  • Plastic Tape
  • Yarn & Filaments
  • Printing, Coating & Laminating


View Complete details

get quoterequest a call back
Compression Load Cell

Compression Load Cell

Rs 10,500  / PieceGet Best Price
Capacity300, 400, 500 TF
MaterialSteel
Model Number90210
Environmental Protection ClassIP65
Excitation Voltage10-15 V DC
Nominal Output2.0 mV/ V
Safe Overload of Rated Capacity150%
Ultimate Overload of Rated Capacity300%
Price Range: Rs.10500 to 45000

Description


Model 90210 is a strain gauge based, compact & low profile compression type load cell. It is constructed from electrodes nickel plated tool steel material. The cell us recommended for tank, hopper, hydraulic press, compression force testing, civil & construction material testing applications.

Features:

  • Compact and Low Profile.
  • Dual Bridge For sensor redundancy can be provided optionally.

Applications:

  • Compression Force Testing
  • Hydraulic Press
  • Tank, Silo Weighing
  • Civil & construction material testing
  • Pile & Structure Testing

Electrical Termination:
  • +Input Green
  • +Output White
  • -Input Black
  • -Output Red
  • Shield

CAPACITY A B C D F G H
300,400,500 Tf 200 120 280 25 430 M20 X 1.50 25

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES