Call 08046077424 78% Response Rate

our range

Compression Load Cell

Prominent & Leading Wholesale Trader from Ahmedabad, we offer jewellery miniature load cell, rocker type compression load cell, mini pancake load cell and compression load cell.
Jewellery Miniature Load Cell

Jewellery Miniature Load Cell

Rs 1,100  / PieceGet Best Price
Capacity2 Kg
MaterialAluminum
FeaturesLow profile
Creep Error (30 minutes)+/-0.03% FS
Temperature Effect on Zero+/-0.0015% FS/DegC
Temperature Effect on Output+/-0.002% FS
Zero balance+/- 1% FS
Maximum Safe Overload150% FS
Ultimate Safe Overload200% FS
Recommended Excitation Voltage5 to 15V DC
Output Resistance350
Insulation resistance at 50V DC>= 1000 M Ohm
Compensated Temperature Range-10 to +40 Deg C
Operating Temperatue Range-20 to +70 Deg C
Description

Model 60610 Jewellery Miniature Load Cell is a Strain Gage based low profile bending beam Miniature Load Cell and is ideal for Table Top & Jewelery Scales. It is designed for low eccentric load sensitivity. It is provided with mechanical over load & under load protection mechanism.

Features:
  • Single Point Capability with Minimum Off-centre Error.
  • Low Profile Design.
  • Moisture Proof Sealing.
  • Inbuilt Protecting Bracket.
  • Capacity as low as 100 gmf. Full Scale.

Applications:
  • Jewellery Scales.
  • Small Bagging Machine.
  • Thread Tension Measurements Provided with bracket to protect from overload, under load & side load effects.

Electrical Termination:
  • +Input Red
  • +Output Green
  • -Input Black
  • -Output White
  • Shield

Capacity A B
200 gmf. to 500 gmf. 34.5 40
700 gmf. to 2 kgf. 25 4

View Complete details

get quote request a call back
Rocker Type Compression Load Cell

Rocker Type Compression Load Cell

Rs 7,200  / PieceGet Best Price

Product Brochure

Capacity16-200 Ton
MaterialStainless Steel
Ingress ProtectionIP68
Zero balance+/- 1% FS
Maximum Safe Overload150% FS
Ultimate Safe Overload300% FS
Recommended Excitation Voltage5 to 15V DC
Maximum Excitation Voltage15V DC
Insulation resistance at 50V DC>= 1000 M Ohm
Compensated Temperature Range-10 to +40 Deg C
Cable Length1-20 meter
Description

Single Column Rocker type compression Load Cell model-90410 is Strain Gage based which is fully temperature compensated. It is provided with antirotating mechanism and it is self restoring and easy to install. This is also available with mounting module WM-VIII upon request.This is linearised with accuracy of 0.025% of FSD.This Load Cell is provided with surge voltage protection.

Features:
  • Complete environmental Protection - IP68 class
  • Standard output 2.0m V/V available
  • Laser welded
  • Stain less steel construction

Applications:
  • Weigh bridge scale
  • Tensile testing
  • Industrial automation
  • Materials Testing
  • Truck Weighing

Electrical Termination
:
  • +Input Red
  • +Output Green
  • -Input Black
  • -Output White
  • Shield

Type

B

R d D H
10,15,20,30,40 150 150 44 90 75
45,50,60 175 150 44 90 75
75,100 200 300 65 90 100

View Complete details

get quote request a call back
Mini Pancake  Load Cell

Mini Pancake Load Cell

Rs 9,500  / PieceGet Best Price

Product Brochure

BrandADI
Model90610 -M
Capacity300 Kg
MaterialStainless Steel
Ingress ProtectionIP65
ApplicationCompression Testing
FeaturesHardened Stainless Steel construction
Creep Error (30 minutes)+/- 0.03% FS
Temperature Effect on Zero+/-0.005% FS/DegC
Temperature Effect on Output+/-0.005% FS/DegC
Zero balance+/- 1% FS
Maximum Safe Overload150% FS
Ultimate Safe Overload250% FS
Recommended Excitation Voltage5 to 15V DC
Maximum Excitation Voltage15V DC
Input Resistance390 +/- 10 Ohms
Output Resistance350 +/- 3 Ohms
Insulation resistance at 50V DC>= 1000 M Ohm
Compensated Temperature Range-10 to +40 Deg C
Operating Temperature Range-20 to +70 Deg C
Cable Length1 m
Description

90610-Mini Pancake Compression Load Cell are suitable for applications where space is constraint. This is constructed from heat treated stainless steel suitable for harsh and hygenic industrial applications. It is sealed for IP-65 protection and it has long life. Extremely suitable for automation,tensile testing and force measurement. 90610-Mini is available with integral load button.

Features:
  • Standard output 2.0 m V/V available. Hardened stainless steel construction.
  • Miniature and low profile.
  • Easy for installation.
  • Custom built design available on request.
  • Available with mounting threads optionally.

Applications:
  • Tensile testing.
  • Force and impact test.
  • Robotics.
  • Test Bench.
  • Automation.
  • Industrial Force Measurement.

Electrical Termination:
  • +Input Red
  • +Output Green
  • -Input Black
  • -Output White
  • Shield

View Complete details

get quote request a call back

Compression Load Cell

Price on Request
Established in the year 1988 we Gandhi Semicons has been successfully serving our clients by providing them with superior quality of Load Cell Load Indicator Weighing PCB Card Pressure Transducers and much more

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES